Discount wholesale Aluminum Alloy 7075 T6 Plate - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi
Discount wholesale Aluminum Alloy 7075 T6 Plate - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
|
Chemical Composition WT(%) |
|||||||||
|
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
|
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
|
Typical Mechanical Properties |
|||||
|
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
| T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
| ＞25.00~100.00 |
560 |
500 |
7 |
150 | |
| ＞100.00~150.00 |
550 |
440 |
5 |
150 | |
| ＞150.00~200.00 |
440 |
400 |
5 |
150 | |
| T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
| ＞25.00~75.00 |
475 |
405 |
7 |
135 | |
| ＞75.00~100.00 |
470 |
390 |
6 |
135 | |
| ＞100.00~150.00 |
440 |
360 |
6 |
135 | |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
LME ASIA WEEK 2019: What’s on and where? | Aluminium Flat Bar
Disabled donkey gets special cast Open Navigation Close Navigation Search Facebook Twitter YouTube RSS Feed Email | Aluminum 5086
We also offer product sourcing and flight consolidation services. We've got our personal factory and sourcing office. We can easily present you with almost every style of merchandise linked to our merchandise range for Discount wholesale Aluminum Alloy 7075 T6 Plate - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi , The product will supply to all over the world, such as: Sheffield, Liverpool, Mombasa, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Deborah from Algeria - 2018.08.12 12:27
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Jane from Argentina - 2018.06.18 17:25
