Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi
Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
|
Chemical Composition WT(%) |
|||||||||
|
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
|
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
|
Typical Mechanical Properties |
|||||
|
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
| T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
| ＞25.00~100.00 |
560 |
500 |
7 |
150 | |
| ＞100.00~150.00 |
550 |
440 |
5 |
150 | |
| ＞150.00~200.00 |
440 |
400 |
5 |
150 | |
| T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
| ＞25.00~75.00 |
475 |
405 |
7 |
135 | |
| ＞75.00~100.00 |
470 |
390 |
6 |
135 | |
| ＞100.00~150.00 |
440 |
360 |
6 |
135 | |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Ransomware cyber-attacks are targeting large companies and demanding huge payments | A7075 Aluminum Sheet
BAE Systems to Modernize Cruiser USS Vicksburg Under $42 Million Navy Contract | 4043 Aluminum Plate
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi , The product will supply to all over the world, such as: Montreal, Bolivia, Tunisia, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Maud from azerbaijan - 2018.09.21 11:01
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Elma from Paraguay - 2018.06.30 17:29
