Manufacturing Companies for Aluminum Bar Stock - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi
Manufacturing Companies for Aluminum Bar Stock - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
Chemical Composition WT(%) |
|||||||||
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
Typical Mechanical Properties |
|||||
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
>25.00~100.00 |
560 |
500 |
7 |
150 | |
>100.00~150.00 |
550 |
440 |
5 |
150 | |
>150.00~200.00 |
440 |
400 |
5 |
150 | |
T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
>25.00~75.00 |
475 |
405 |
7 |
135 | |
>75.00~100.00 |
470 |
390 |
6 |
135 | |
>100.00~150.00 |
440 |
360 |
6 |
135 |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Smart factory made from steel and charred wood | A7075 Aluminum Sheet
ICSG releases preliminary copper data for January 2019 | 4043 Aluminum Plate
To consistently enhance the management method by virtue of the rule of "sincerely, fantastic religion and top quality are the base of business development", we extensively absorb the essence of associated goods internationally, and constantly acquire new merchandise to satisfy the needs of shoppers for Manufacturing Companies for Aluminum Bar Stock - 7075 T6 Aluminum Rod In Stock – Round Square Rectangular – Miandi , The product will supply to all over the world, such as: Dubai, Monaco, Bahamas, We have our own registered brand and our company is developing rapidly owing to high quality products, competitive price and excellent service. We sincerely hope to establish business relations with more friends from home and abroad in the near future. We look forward to your correspondence.
By ron gravatt from Jamaica - 2018.11.28 16:25
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Julie from Senegal - 2017.09.22 11:32