professional factory for Aluminum Flat Bar - 7075 T651 Aluminum Bar | Aerospace High Strength Bicycle Industry – Miandi
professional factory for Aluminum Flat Bar - 7075 T651 Aluminum Bar | Aerospace High Strength Bicycle Industry – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
|
Chemical Composition WT(%) |
|||||||||
|
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
|
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
|
Typical Mechanical Properties |
|||||
|
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
| T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
| ＞25.00~100.00 |
560 |
500 |
7 |
150 | |
| ＞100.00~150.00 |
550 |
440 |
5 |
150 | |
| ＞150.00~200.00 |
440 |
400 |
5 |
150 | |
| T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
| ＞25.00~75.00 |
475 |
405 |
7 |
135 | |
| ＞75.00~100.00 |
470 |
390 |
6 |
135 | |
| ＞100.00~150.00 |
440 |
360 |
6 |
135 | |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Shack owners on Tasmania’s west coast fear their lifestyle in ‘God’s country’ is under threat | Aluminium Square Rod
LME ASIA WEEK 2019: What’s on and where? | Aluminium Flat Bar
It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for professional factory for Aluminum Flat Bar - 7075 T651 Aluminum Bar | Aerospace High Strength Bicycle Industry – Miandi , The product will supply to all over the world, such as: New Delhi, Singapore, Turkmenistan, Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
By Coral from Islamabad - 2017.06.29 18:55
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Pandora from Czech - 2018.08.12 12:27
